|
AMU-2405G-SMA
AMU-2405G-SMA 802.11g/b 500mW , AP/Client/Repeater/Bridge; LED Wan/Lan/Power; Lighting arrestors protection; Stainless Steel adjustable mounting bracket;No internal antenna panel; Plastic outdoor weatherproof case; -30c~65c ,120/240~48vdc power ,up to 30km with Yagi, 16-dbi gain[not included]
|
| |
|
|
|
| SMA connector for Yagie 16db antenna |
48VDC power with in-built arrestors | |
| |
|
Feature Highlights |
- 802.11g, 54Mbps /108Mbps, 500mW, up to 30Km
- Plastic outdoor unit, water-proof, operating under -30C ~ 65C
- Least gain loss of antennas, highest transmission efficiency
- Built-in 500mW 802.11g booster, output 500mW, up to 30Km
- Data rate & sensitivity Indication for antenna alignment
- LED indication (3) for TX/RX, LAN, operation indications (easy diagnosis by sight)
- POE (Power over Ethernet) design, highest stability.
| |
| |
|
Platform Spec. |
Output power
|
27dBm (100mW) |
Frequency
|
2400MHz~2483.5MHz |
Number of Channel
|
13 |
Modulation
|
CCK, DQPSK, DBPSK, OFDM |
RF Signal type
|
DSSS |
Standard
|
IEEE802.11g; IEEE802.3; IEEE802.3u |
Antenna connector
|
SMA connector for Yagie 16db antenna |
Lighten protection
|
In-built 3 arrestors, withstand 6KV |
Coverage
|
Up to 30Km internal antenna |
Operating Mode(Programmable)
|
AP/Bridge(WDS)/Client/Repeater(Programmable) |
SDRAM
|
8MB |
FLASH
|
2MB |
Data Rate
|
54/48/36/24/18/12/6Mbps auto fallback |
Management Software Support
|
Web based GUI Interface, Web browser supported configuration & firmware upgrade, DHCP client, |
Sensitivity/Bandwidth
|
-88dBm
|
11Mbps, PER < 8% |
| -74dBm |
54Mbps, PER < 10% | |
Distance/Bandwidth
|
17Mbps @ 30Km (802.11g) |
Operating Temperature
|
-30 C ~ 65 C |
Security
|
64-bit/128-bit/152-bit encryption systemWi-Fi protected Access (WPA) |
Power source
|
AC 100~240V; DC 48V/0.4A |
| Weight of each unit |
5Kg/unit (including cables and all accessories) | |
| |
|
Angle adjustable mounting bracket |
LED for LAN, POWER, TX/RX indication (easy diagnosis by sight) |
 |
 | |
|